Part Number: TIDM-1018
I noticed that the data and PoE power input do not have enough clearance to pass the 1.5kV isolation requirement for POE. I've attached the top layer Gerber of this board.

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TIDM-1018
I noticed that the data and PoE power input do not have enough clearance to pass the 1.5kV isolation requirement for POE. I've attached the top layer Gerber of this board.

Hi Jeremy,
I'll reach out to the designers of this board and get back to you.
Thanks,
-Eric Rentschler
Hi Jeremy,
This is a legacy design so it is no longer being actively supported. I would suggest updating the clearance on your end to resolve the issue.
Thanks,
-Eric Rentschler