• State TI Thinks Resolved
  • Replies 6 replies
  • Answers 2 answers
  • Subscribers 32 subscribers
  • Views 144 views
  • Users 0 members are here
Support feedback
Options
Options
Related

AM263P4: Graph - Time doesn work

Ionut Tidrea
Prodigy 40 points

Part Number: AM263P4

Hello, 

I am trying to use in the debbuging mode the feature Graph - Time for a variable but the opened window is empty and no values are showing.

As a debbuger I am using an XDS110 and have no trouble seeing the variables in watch.

 

Thank you!

  • 0
    TI__Guru 62220 points

    Hi Ionut,

    Am263Px is a SoC with Cached memory architecture, that means, when you put a variable in RAM , by default variables status updates in watch window takes time to update.

    Where have you placed the variable - RAM, TCM ??

  • 0
    Prodigy 40 points

    Hello Anand,

    In WATCH window the variables are updating correctly and can be visible. But in WATCH, i can right click a variable and selected option Graph Selected Value with Time option. A new window appears but even though the variables are correctly shown in the WATCH, the GRAPH is showing nothing. What is the procedure to use this feature?

    Thank you! 

  • 0 in reply to Ionut Tidrea
    TI__Guru 62220 points

    Allow me to test it and share the observations with you by tomorrow

  • 0 in reply to Nilabh Anand
    Prodigy 40 points

    Hello, did you managed to test it?

    Thank you, Ionut!

  • 0 in reply to Ionut Tidrea
    TI__Guru 62220 points

    Hi Yes I was able to see the value changing, attaching a video of the same

  • 0 in reply to Nilabh Anand
    TI__Guru 62220 points

    Configurations on my side:

    1. Keep continous refresh on 

    2. Set data properties correctly

    3.  Properties to capture one single data int32_t