• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 311 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

integration with IAR design suite

Ashish Gupta64745
Prodigy 90 points

We are using LM4F232 microcontroller with 20 pin JTAG header. We want to use IAR IDE for debugging. Pl suggest how to download IAR design suite .

  • 0
    TI__Expert 8180 points

    Ashish,

    If you have purchased the EKI-LM4F232, this kit comes with the evaluation version of IAR Embedded Workbench® development tools.  If you wish to download the full version of IAR, please refer to the IAR website for further details.

    -Rebecca

  • 0
    Guru 47900 points

    Ashish Gupta64745 said:
    LM4F232 with 20 pin JTAG header

    Curious that - every official 4F Eval board uses way smaller - 10 pin - 0.050" header.  So youve rolled your own - not followed example of TI's initial BGA and newer QFP M4F boards. 

    Beyond advice of RR - suggest you download - code-sized-limited (forever) version of Kickstarter IAR.  Learn - build skills with that ver. initially.  Only much later move to, "blink & gone" - time limited but code-size-unlimited ver...

    (note that RR adopting cohort's "late nite" modus operandi...)