MIBSPICLK Pin related SPIPC8 Register during MASTER Mode

Pashan None

Genius 5660 points

Hello Support,

For MibSPI Peripheral SPIPC8 Register CLKPSEL bit should be Logic HIGH or LOW when MibSPI is in MASTER Mode?

Is it DON'T CARE when MibSPI is in MASTER Mode with CLKFUN Bit as HIGH within SPIPC0 Register?

Any detailed information will be helpful.

Please let me know.

Thank you.

Regards

Pashan

over 13 years ago

0 Jean-Marc Mifsud over 13 years ago

TI__Mastermind 22375 points

Pashan,

When the SPICLK is used as functional pin and the SPI is defined has master, the SPICLK is an output.
In this case the Pull Select is don't care.
The same way, when a pin is defined as general purpose output, the pull select is also don't care.

0 Jean-Marc Mifsud over 13 years ago in reply to Jean-Marc Mifsud

TI__Mastermind 22375 points

Pashan,

If your question has been answered, could you please mark this post has "verified answer" so I can close this thread?

Arm-based microcontrollers

Arm-based microcontrollers forum

MIBSPICLK Pin related SPIPC8 Register during MASTER Mode