Halcogen RAM parameters cannot be changed

Imran Sheikh

Other Parts Discussed in Thread: HALCOGEN

Hi,

I am trying to run this sample USB CDC example http://processors.wiki.ti.com/index.php/HALCoGen_USB_Device_-_driver_%26_CDC_Class.

In step 5, it is required to change the stack size but all the parameters are uneditible, will anyone suggest how to tackle this problem.

I have also attached the snapshot of the HALCOGEN.

thanks,

Imran.

over 13 years ago

0 Diwakar Bansal over 13 years ago

TI__Intellectual 1325 points

Hello Imran,

You should be able to update the following 'Stack Length' fields: User, Supervisor, FIQ, IRQ, Abort and Undefined Stack Length. Other values would update automatically.
Please let me if this is still an issue.

Regards,
TI Forum Support

0 Imran Sheikh over 13 years ago in reply to Diwakar Bansal

Prodigy 120 points

Thanks,

It solved the problem actually when i changed the IRQ stack length it actually adjusted every thing.

Imran.

Arm-based microcontrollers

Arm-based microcontrollers forum

Halcogen RAM parameters cannot be changed