+5.0V supply test point on the LM4F232 Evaluation Board

Peter John

Hi there,

In the schematic on page 25 of this document (the LM4F232 Evaluation Board) it shows the +5.0V from U7 being routed out to test point H102. I cannot find H102 on the PCB nor in the PCB artwork. Can somebody help me find it ?

Thanks

Peter

over 13 years ago

0 Stellaris Mitch over 13 years ago

TI__Intellectual 2790 points

Hi Peter,

I think that's the one above-and-to-the-left of the MCU (board oriented so that the text can be read).

0 Peter John over 13 years ago in reply to Stellaris Mitch

Expert 1480 points

Mitch, thank you very much for a prompt and accurate answer !

regards

Peter

Arm-based microcontrollers

Arm-based microcontrollers forum

+5.0V supply test point on the LM4F232 Evaluation Board