• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HALCoGen 03.03.01 GUI ADC group1/2 channel select / ADC timing calculations fails (minor issue)

eval
Prodigy 150 points
Other Parts Discussed in Thread: HALCOGEN

Hello,

I used HALCoGen 03.03.01 to generate a default RM48 HDK based project.

Using the GUI to select ADC1/Group1(or Group2) input channels fails on

Scan/Total calculations when step by step enabling Pin0 to Pin 16.

Enable Pin16  does not increase timings / Disablie Pin16 increases ADC time.

Regards