• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 243 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Opening Ports

timur yaprak
Prodigy 70 points


Hi -

I was wondering if anyone knew how to go about opening the ports (in terms of commands) on code composer studio for the stellaris launchpad. Thanks for your help.

  • 0
    Genius 5695 points

    It seems that this question gets asked every few hours -- if, however, in a different way.

    If you want training on the Launchpad series:

    The best bet is to go to the Launchpad page and download the tutorials, the videos and visit the training Wiki pages.

    http://e2e.ti.com/support/microcontrollers/stellaris_arm_cortex-m3_microcontroller/default.aspx

    How to use the ports is well covered in the training material. It worked for me.

  • 0 in reply to Dave Robinson
    Guru 117855 points

    Dave Robinson said:
    It seems that this question gets asked every few hours

    Stellaris and all other ARM MCUs are complex beasts - methinks that the description, "launch" contributes to user frustration. 

    When users seek to dig at all beyond, "most basic" - good old: reading, review, thought, experimentation - and trial/error still are required. 

    Marketing's choice of, "launch" may create an unrealistic expectation - study, focus, effort all remain - "very much in play!"