Windows 8 - drivers for stellaris launchpad

Eduardo Bernardi

Intellectual 920 points

Hello, I'm trying to install the icd drivers for stellaris launchpad on my Windows 8, but i get this error:

"A problem occurred while attempting to add the driver to the store."

It seems i need a certificate for this driver, but i cant find this file on the stellaris driver foulder.

I tried to disable driver signature enforcement but didnt work, i saw a post here on the forums:

http://e2e.ti.com/support/microcontrollers/stellaris_arm_cortex-m3_microcontroller/f/471/t/217863.aspx

The solution was install the test certifcate but i cant figure out how to do it, anyone can help me?

over 12 years ago

0 Dave Robinson over 12 years ago

Genius 5695 points

There are several posts addressing this -- just do a search for Windows 8 on this forum -- at least two explain how to disable the checking.

0 khary lambie over 11 years ago

Intellectual 330 points

i am getting the same problem

"A problem occurred while attempting to add the driver to the store."

is there anyone that knows the solution to this problem can you get back to me i am using windows 8.1 and i need the driver for the tiva internet of things launchpad device

0 Luis Afonso over 11 years ago in reply to khary lambie

Guru 20670 points

The answer is above...just search in the forum for problems with ICDI drivers windows 8.

The solution is to disable driver signature enforcement and then try to instal them

Arm-based microcontrollers

Arm-based microcontrollers forum

Windows 8 - drivers for stellaris launchpad

"A problem occurred while attempting to add the driver to the store."

"A problem occurred while attempting to add the driver to the store."