• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 338 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How do I set multi-buffer mode for the SCI module using HalCoGen?

Mandeep Panesar
Prodigy 90 points
Other Parts Discussed in Thread: HALCOGEN

Hi,

I would like set multi-buffer mode (MBUF MODE) on the SCI module but can not determine how to achieve this using HALCoGen.

Please advise.

Thanks.

  • 0
    TI__Intellectual 2145 points

    Hi Mandeep,

            Thanks for your post. You can't config the SCI in multi-buffer mode with HALCoGen. If you want to use this function,  Please refer to the previous post for this issue:

            http://e2e.ti.com/support/microcontrollers/hercules/f/312/t/206506.aspx

    Hope that this may help you.

    Best Regards,
    Shelford