Launchpad reconfigured PC0, now what?

Paul Haddad

I was playing around with timers and tried reconfiguring PC0 as a PWM style Timer output on a Launchpad. Well I'm guessing it worked but since PC0 is used by the JTAG interface I can't re-program the chip or do basically anything else...

Any way to fix my stupidity?

over 12 years ago

0 cb1_mobile over 12 years ago

Guru 117855 points

Acquire bugle - play Taps...

Or - LM Flash Programmer > Utilities > Recover. (your part is a Blizzard.)

Bet you won't do that again.

0 Paul Haddad over 12 years ago in reply to cb1_mobile

Prodigy 120 points

Thank you but I wouldn't necessarily make that bet. :^)

If anyone runs into this in the future, let me save a couple of minutes of reading the Help file. The exact option is under LM Flash (currently version 1470) Other Utilities -> Debug Port Unlock -> Fury, Dust Devil, and Blizzard Classes.

0 cb1_mobile over 12 years ago in reply to Paul Haddad

Guru 117855 points

Good for you!

Must note (cannot resist) your subject, "Launchpad reconfigured PC0!"

Bloody board - almost human in its ability (surely unaided/unattended) to wreak havoc...

Arm-based microcontrollers

Arm-based microcontrollers forum

Launchpad reconfigured PC0, now what?