Lauterbach TRACE32 peripheral files (.PER)

Tony Morrell

Other Parts Discussed in Thread: TMS570LS3137, TMS570LS1227, TMS570LS2124

Hi,

I’m trying to get hold of the Lauterbach TRACE32 peripheral files (.PER) associated with the TMS570 devices we are using, specifically:

TMS570LS3137
TMS570LS1227
TMS570LS2124

We have an NDA agreement. Are you able to provide me with these files?

Regards, Tony

over 13 years ago

0 QJ Wang over 13 years ago

TI__Guru**** 200246 points

Hi Tony,

Unfortunately we don't have TRACE32 PER file. One of our customers got those files from Lauterbach.

https://e2e.ti.com/support/microcontrollers/hercules/int-hercules/f/365/p/250590/877626.aspx#877626

Regards,

0 Tony Morrell over 13 years ago in reply to QJ Wang

Genius 4130 points

Hi QJ,

I can't access the link you posted, I get a 'Group Not Found' message.

It was Lauterbach that requested I get the .PER files from TI, as they said they're not on general release as they are protected by TI.

Regards, Tony.

0 QJ Wang over 13 years ago in reply to Tony Morrell

TI__Guru**** 200246 points

HiTony，

Please try the link again:

https://e2e.ti.com/support/microcontrollers/hercules/int-hercules/f/365/p/250590/877626.aspx#877626

Regards,

0 Tony Morrell over 13 years ago in reply to QJ Wang

Genius 4130 points

Hi QJ,

Sorry, it still doesn't work, same error. Did you mean to post exactly the same link? It it because this is perhaps a TI internal link only. I've had that problem before?

Regards, Tony.

0 Tony Morrell over 13 years ago in reply to Tony Morrell

Genius 4130 points

Hi QJ,

I have now obtained these files directly from another TI source, so this post can now be closed.

Regards, Tony

0 Venkatesh Chilapur1 over 13 years ago in reply to Tony Morrell

Prodigy 20 points

Hi Tony,

I am also on the same page as you are. Basically i got lauterbach debugger up and running for target "TMS570PSFC61A".

I could flash, debug my code. But i cannot view the onchip module registers through the view->peripheral option. It says i need to obtain this *.per file from TI.

Can you please let me know whom i can contact in the TI for this file for target "TMS570PSFC61A".

Thanks very much in advance..

0 Tony Morrell over 13 years ago in reply to Venkatesh Chilapur1

Genius 4130 points

Hi Venkatesh,

I've contacted TI on your behalf and a representative will be replying to this post with generic information on how to obtain Lauterbach .PER files.

I hope this helps.

Regards, Tony.

0 Venkatesh Chilapur1 over 13 years ago in reply to Tony Morrell

Prodigy 20 points

Hi Tony,

Sorry to bother you so early, but did you hear anything from TI person related to *.PER file. I looked in to options to write a *.PER for my own. But it involves significant effort.

Best Regards,

Venkatesh Chilapur

0 Tony Morrell over 13 years ago in reply to Venkatesh Chilapur1

Genius 4130 points

Hi Venkatesh,

Like I said above, you'll have to wait for a TI representative to reply to this post. I have been told that your request has been passed on to TI e2e representative. It's out of my hands I'm afraid.

Regards, Tony.

0 Jean-Marie Voisin over 13 years ago in reply to Tony Morrell

Prodigy 10 points

Hello all,

Any news from the TI representative ?

I can't even see the CPU registers.

Could you please provide the .per files in a visible way?

Are they available somewhere?

Thanks in advance, JM

Arm-based microcontrollers

Arm-based microcontrollers forum

Lauterbach TRACE32 peripheral files (.PER)