RM48L950 Power On Reset Question

R11

Other Parts Discussed in Thread: RM48L950

For the RM48L950, the following table exists showing what occurs with the device under reset. Do the GIO registers assume the default reset state during both power-on-reset (nPORRST) and system / warm reset (nRST) or is it for power-on-reset only?

over 12 years ago

0 Zhaohong Zhang over 12 years ago

TI__Mastermind 22715 points

Rustin,

GIO registers get the default values after both nPORRST and nRST. The difference between nPORRST and nRST is that nRST does not reset ESM status registers and debug registers.

Thanks and regards,

Zhaohong

0 Paul Blecher over 12 years ago

TI__Intellectual 1115 points

Rustin,

Did Zhaohongs response answer your question?

Thanks,

Paul

Arm-based microcontrollers

Arm-based microcontrollers forum

RM48L950 Power On Reset Question