USER CODE BEGIN at end of spiInit()?

Jack Andrews

Other Parts Discussed in Thread: HALCOGEN

Hi,

Would it be possible to add a USER CODE BEGIN/END block at the the end of spiInit() in spi.c? Most other driver init functions have one, but SPI doesn't seem to - it would just let me tidy up my code a little.

Thanks,

Jack

over 13 years ago

0 Jay Shen over 13 years ago

TI__Intellectual 845 points

Hi Jack,

Thanks for your suggestion. It's a good suggestion. We will follow it.

For you urgent usage, you can write a function independently and call it just after calling spiInit(). It should have the same effect.

Best Regards.

Jay

0 Jack Andrews over 13 years ago in reply to Jay Shen

Intellectual 370 points

Thanks. It would also be nice to have one in sys_dma.c. This just lets me keep driver code separate.

Jack

0 Jay Shen over 13 years ago in reply to Jack Andrews

TI__Intellectual 845 points

Received. Thanks again for your suggestion.

Best Regards.

Jay

0 Prathap over 13 years ago in reply to Jack Andrews

TI__Genius 14205 points

Hi Jack,

Adding this feature is very easy, but if some user is already using the user code in spi.c or sys_dma.c, it would be disturbed.

HALCoGen team is informed about this issue, hopefully in upcoming release this would be addressed.

Regards
Prathap

Arm-based microcontrollers

Arm-based microcontrollers forum

USER CODE BEGIN at end of spiInit()?