• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 33 subscribers
  • Views 529 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Release Scheudle Update : TM4C123GH6PM

R11
Expert 1485 points
Other Parts Discussed in Thread: TM4C123GH6PM

Hello,

Can you pleae provide the latest release scheudle for the Tiva 4: TM4C123GH6PM

Thank you.

  • 0
    TI__Expert 8560 points

    Hi Rustin,

    With the disclaimer that I'm in apps, not in marketing, but a quick check of the product folder on our website (http://www.ti.com/product/tm4c123gh6pm) indicates that this device is ACTIVE and is in full production.  So it should be available now.

    John

  • 0 in reply to John Walker
    Mastermind 9792 points

    While it may be in production, it doesn't appear to be in stock anywhere. See:

    http://www.findchips.com/avail/?part=TM4C123GH6PM

  • 0 in reply to Derek
    Mastermind 7015 points

    Any more info about this please?

     

  • 0 in reply to John Walker
    Guru 47900 points

    John Walker said:
    With the disclaimer - I'm in apps, not in marketing

    Might this fact - by itself - speak volumes?  Good grief!  (how long before marketing starts providing tech support?)

    Might an apps guy - answering a clearly marketing question - provide, "cover?"

    And - in light of  past "LX4F promotion to real LM4F" hiccups (to be kind) - might we loyal/hopeful user/specifiers be entitled to something beyond, "cover?"

  • 0 in reply to cb1
    TI__Expert 7165 points

    cb1,

    We have been prioritizing any customers' ramps to production these first few months, but the supply is now built up and the team is prioritizing getting disties stocked. We will start with the TI estore and expand out from there.

    The parts are definitely in production.

  • 0 in reply to miguel2667
    Guru 117855 points

    @Miguel,

    Thank you - clearly response from the (more) appropriate department (i.e. yours) adds comfort. 

    "Prioritizing" rather than "basic release" to disty stock seems bit outside, "normal/customary" - especially so in light of past delivery "issues." 

    Kindly note that "ramping" - when starting from at/about "ground zero" - may not offer ... hoped for, "warm/fuzzies..." 

    Parts "over-flowing" the (usual suspect) disty shelves - far better in that regard...