Benchmark for the TI RM48L950A

Hi Paul,

We don't have code to perform benchmark. The demo source code is located at: 

C:\ti\Hercules\Hercules Safety MCU Demos\RM48x_target_sources

RM48x doesn't have cache. The clock and flash wait states are set in system.c.  

Regards;

QJ

Hi,

Thanks for your answer.

Is there some schematic or hardware info for Hercules development kit USB : TMDXRM48USB

The page 'http://www.ti.com/tool/tmdxrm48usb' points toward the wrong development kit: TMDXRM48HDK.

Basically I would like to set the maximum clock speed 200MHz but I am not sure what is the clock source on that board.

Hi Paul,

here is the link to download the schematics for RM48 USB stick. The oscillator on the kit is 16MHz. We don't recommend to run 200Mhz on USB kit. Please use HalCoGen to generate test code. It is pretty quick and reliable. Thanks

Regards,

QJ 

Hi,

Thanks a lot for your fast response!

Did you forget the link in your previous message?

Also, from the demo code system.c, the CPU clock would be 160Mhz.  Could you confirm this?

Hi Paul,

Here is the link:

http://processors.wiki.ti.com/index.php/RM48_USB_Kit

Regards,

QJ

Hi Paul,

The CPU clock is 160MHz in the dmeo code.

Regards,

QJ