CAN Boot loader Procedure

ishan maniar

Prodigy 175 points

Other Parts Discussed in Thread: UNIFLASH

Hie,

I am Using TMS570LS31 HDK for my application,

And I need to use a CAN bootloader for my application,

Is there any documentation on the steps to do so?.....

It would be really helpful if there is some some list of steps to load a CAN bootloader in the HDK

Regards,

Ishan

over 12 years ago

0 QJ Wang over 12 years ago

TI__Guru**** 200206 points

Hi Ishan,

Have you downloaded the bootloader from our WIKI page? This page contains the CAN bootloader for MCU side, and bootloader test code for PC side.

http://processors.wiki.ti.com/index.php/TMS570_Hercules_MCU_Bootloader

To program the bootloader to your MCU flash, you need JTAG conenction and flash tool (norFlash, Uniflash, or CCS5.x).

Attached please find the user guide.

Regards,5775.Using Hercules CAN Bootloader Rev002.pdf

0 Alican Hasarpa over 10 years ago in reply to QJ Wang

Prodigy 45 points

Hi QJ,
I am also trying to use CAN Bootloader. I checked your sample project but I am using IXXAT USB to CAN module instead of NI one. I am also quite new with Visual Studio and CCS. I guess I can use processors project (CCS project) directly but I need to change the PC side application right? (the visual studio project) What should I do exactly? Which files do I need to modify?
Best regards
Alican

Arm-based microcontrollers

Arm-based microcontrollers forum

CAN Boot loader Procedure