• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 533 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCB considerations for unused TMS570 pins

Alan Day
Intellectual 920 points
Other Parts Discussed in Thread: TMS570LS3137

Hi,

A PCB manufacturer is suggesting I remove the pads for all unconnected TMS570LS3137 pins, these unused pins (around 80 in total) consist of the peripherals I've not needed in my design.

Would this cause any stability, reflowability or mechanical issues?  Does TI have any design recommendations/guidelines regarding this?

Thanks,

Alan

  • 0
    TI__Guru**** 193196 points

    Hi Allan,

    Some "NC" balls (or pins) are not connected to any internal logic and can be connected to the ground or left open without affecting the functionality of the device. Some "NC" balls (or pins) may be internally connected to some functionality, It is recommended for such balls (or pins) to be left unconnected. Leaving the "NC" balls (or pins) unconnected with pads or without pads doesn't affect the device's operation.

    Regards,

    QJ