• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 2612 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PJ0/PJ1 5V tolerant when in USB signal mode?

gkonzak
Intellectual 470 points
Other Parts Discussed in Thread: TM4C123GH6PZ

The data sheet on the TM4C123GH6PZ says PJ0 and PJ1 are not 5V tolerant. When switched to USB0DM and USB0DP, are they tolerant to higher signal levels?