Generate code through HALCoGen 03.05.02

dison wang

Other Parts Discussed in Thread: HALCOGEN

Hi,

Is there someone know how to generate a code which can make pins of modul as GIO through setting the HALCoGen.

I do not use the modul like I2C, N2HET, etc. I want their pins work like GIO. I can not find the setting item in the HALCoGen.

Thanks,

Chuan

over 12 years ago

0 Zhaohong Zhang over 12 years ago

TI__Mastermind 22715 points

Chuan,

Those pins are GIO inputs by default.You can configure them as input or out easily without HALCoGen.

Thanks and regards,

Zhaohong

0 dison wang over 12 years ago in reply to Zhaohong Zhang

Expert 1620 points

Hi Zhaohong,

Thanks for your reply.

If may I set a pin (for example pin54 in PGE package, It is belong to Mibspi and N2HET) without pull up and initialize it to "1" like as a GIOA or GIOB pin in HALCoGen, after I disable the Mibspi and N2HET module?

Thanks,

B.Rs,

Chuan

Arm-based microcontrollers

Arm-based microcontrollers forum

Generate code through HALCoGen 03.05.02