• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 301 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS3137BZ LED's shining

ksu kor
Prodigy 30 points

Other Parts Discussed in Thread: HALCOGEN

Good day

Where can I found the simpliest examples for make LED illuminate. How can I sent 1 or 0 to make it change light. I see, that there are D10,11 and so on LEDs, but I don't know how can I write it in cide for CCS5. Thanks

  • 0
    TI__Mastermind 22375 points

    Hi,

    Could you tell me which board/device you are using?

    The easiest way is to use Halcogen. You will find in the Help menu/Help Topics a list of example for the different devices.

    The Blinky example is using the RTI (Real Time Interrupt) to generate a periodic interrupt. Periodically an LED is switch on and off.

    Please let me know if this example answers your question.

  • 0 in reply to Jean-Marc Mifsud
    Prodigy 30 points

    RM48 USB with TMX570LS3137BZWTQQI.

    There are a directory with examples. But if I want to watch them in CCS all files from directory is loading. And I need only in one the simpliest example, because I am beginner) If I load only a few files .c and .h, I have a problems with connection with device. Especially I want to understand how to make the device and CCS work together.