Unable to dump code into ek-lm4f120xl

mah kon

Hi all,

I am using ccs5 Version: 5.2.1.00018 , windows 7 machine. I am able to build the lab4 example in CCS. When i press debug button, following error obtained..

Unable to find an entry in the TPI ini file for "TMS470REX"
Target driver: C:\ti\ccsv5\ccs_base\DebugServer\drivers\stellaris_emu.dvr

i attached the log file. please suggest me where i went wrong..

over 12 years ago

0 Joerg Quinten over 12 years ago

Guru 17650 points

Hi,

looks like your project settings were wrong or you're using an example which is not related to Stellaris.

Which Lab4 example do you try to build? Were did you find it?

Lab 4 from the Stellaris EK-LM4F120XL LaunchPad Workshop is 'INTERRUPTS AND THE TIMER'. It's the same for the 'Getting Started with StellarisWare and the ARM Cortes -M4F Workshop', but this is using the EK-LM4F232 for running the samples on.

Both samples should run like a charm (tested them both).

Have you verified that your hardware is setup/working correctly?

Furthermore, I highly recommend to use the latest Tiva Workshop (http://processors.wiki.ti.com/index.php/Getting_Started_with_the_TIVA%E2%84%A2_C-Series_TM4C123G_LaunchPad?DCMP=tivac&HQS=TM4C123G-Launchpad-Workshop; runs on your EK-LM4F120XL as well) and to update your CCS installation to the current version (5.4.0.00091; http://processors.wiki.ti.com/index.php/Download_CCS)

Kind regards
aBUGSworstnightmare

Arm-based microcontrollers

Arm-based microcontrollers forum

Unable to dump code into ek-lm4f120xl