PWM help EK-TM4C123GXL board

llo rulo

Other Parts Discussed in Thread: EK-TM4C123GXL

Where can i read the instructions or manual to generate a PWM on a EK-TM4C123GXL board , because I'm really lost in this case ,i have read a lot of this but there are no examples. Any help will be really appreciated.

over 12 years ago

0 Bobby Bradford over 12 years ago

TI__Genius 10040 points

In your TivaWare installation folder (by default, C:\ti\TivaWare_C_Series-1.0), there is a "examples/peripherals/pwm" folder, that will contain a few PWM examples that might provide you with what you are looking for.

--Bobby

0 llo rulo over 12 years ago in reply to Bobby Bradford

Prodigy 30 points

Thanks I only was reading on internet , I didn't checked the tivaware folder.

0 Joerg Quinten over 12 years ago in reply to llo rulo

Guru 17650 points

Hi llo,

have a look at this example here: http://forum.stellarisiti.com/topic/707-using-hardware-pwm-on-tiva-launchpad/

Shows you how to use hardware PWM for controlling the onboard RGB-LED.

aBUGSworstnightmare

0 Vishal Kk over 11 years ago in reply to Bobby Bradford

Prodigy 10 points

Hello,

Can you please share the examples on pwm as am not finding that folder mentioned above .

0 Petrei over 11 years ago in reply to Vishal Kk

Guru 26105 points

Hi,

The link is still active and present, look at the top or bottom of the page, there you can go to next page, #2, and to download the examples you need to register first (site's rules...).

Petrei

Arm-based microcontrollers

Arm-based microcontrollers forum

PWM help EK-TM4C123GXL board