• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 361 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XDS100v2 USB Emulator (Error connecting to the target)

Ziqiang Guo
Prodigy 45 points
Other Parts Discussed in Thread: TMS570LS20216

I'm using  TMDSHVBLPFCKIT  and Code Composer Version 4.2.3.00004.I am getting the error like Dennis',when I connect the board with my pc.

I have checked the XDS100V2 drivers as you say,and everything is OK.What can I do next?

  • 0
    TI__Guru 59540 points

    Hello Ziqiang,

    Please double check to make sure the XDS100V2 and TMS570LS20216 device is selected in your project setup. You can check this by double clicking the .ccxml file for the device under target configs "folder" in the project explorer window. This should open the target configuration screen where you can see which emmulator is selected under Connections, and which device is selected under Board or Device. If both are selected correctly, test the connection using the "Test Connection" button to the right in the window. Let me know the test connection test results.

  • 0 in reply to Chuck Davenport
    TI__Guru 59540 points

    Hello Ziqiang,

    Was the answer above sufficient to help you get through your connection issues? If so, please verify the answer so we may close this thread.  If not, please let us know how we may further assist you.