• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 1271 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EKK-LM3S8962 equivalent board

Mustafa Ekelik
Prodigy 35 points

Other Parts Discussed in Thread: LM3S8962, TM4C129XNCZAD, EK-LM3S8962

I am looking for EKK-LM3S8962 evaluation board for Labview Arm programming. Unfortunately this board is not available in your website. What do you recommend me to program in Labview ?

Thanks for your quick reply,

Mustafa Ekelik

  • 0
    TI__Expert 6140 points

    Mustafa,


    What peripherals do you need? Other requirements?


    If you need ethernet, I would recommend our DK-TM4C129X:

    http://www.ti.com/tool/dk-tm4c129x

  • 0 in reply to David Racine
    Prodigy 35 points

    David,

    I checked your recommended board and saw it has 2 MCU which I dont need,

    secondly as I know Labview supports M3 Cortex not M4, am I wrong ?

    BTW, LM3S8962 has enough peripherals for me.

  • 0 in reply to Mustafa Ekelik
    TI__Expert 6140 points

    Mustafa,


    The board has only one target MCU (TM4C129XNCZAD) and the ICDI MCU, that is used to interface with your PC. The ICDI MCU has pre programmed firmware to translate USB into JTAG for debugging the target MCU, as well as providing a virtual COM port for terminal input/output.

    If labview supports M3 it should by default support a subset of the M4 as well. I've never used that feature in labview but the M3 is basically a subset of the Cortex M4 as far as the instruction set. Also, our M3 devices are Not Recommended for New Designs (NRND) therefore I would highly suggest working with one of our newer Cortex M4 devices. However, if you must have a Cortex M3 with integrated ethernet then your only other over the EK-LM3S8962 option is the DK-LM3S9D96:

    http://www.ti.com/tool/dk-lm3s9d96