• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 924 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS3137 ZWT 337 package pin assignment

dwane bell
Expert 3240 points

Referencing the d/s - SPNS162B, there seem to be contradicting pins assignments regarding pins A8, B8, B9 (See pictures below). Can someone please clarify.  Thank you.

 

 

 

 

    
  
  
  
  
  
  
  
  
  
  
  
 
 
 


 

                       

  • 0
    TI__Mastermind 49120 points

    Dwane,

    Thanks for pointing this out. The terminals A8, B8 and B9 should not be included in the list of No Connects.

    This will be corrected in the next release of the datasheet.

    Regards, Sunil

  • 0 in reply to Sunil Oak
    TI__Guru 62930 points
    Sunil,
    I noticed that this has not propagated to DS yet.
    Also, I believe there are 3 pins that are NC, but are not in the table that should be added.
    T2, U5 and U12 are in pinout as NC, but not in table.
    Regards,
    Wade