How to use the hardware angle generator by HET IDE?

DaeCheol Kang

Hi I'm DaeCheol

I was used the hardware angle generator with reference NHET_REG_HWAG_DRAFTONLY in RM48 MCU.

So i was to get angle value.

But i don't know how to be access HWAACNT in HET IDE Tool.

HET IDE Tool in order to access at HWAACNT should use the HTU or DMA?

I need how to use HWAACNT in HET IDE Tool.

0 Enrique Lizarraga over 11 years ago

We have received your post and we'll get back to you soon.

Regards.

0 Haixiao Weng over 11 years ago

HET IDE can not simulate the HWA associated instructions. (not validated)

Regards,

Haixiao

0 DaeCheol Kang over 11 years ago in reply to Haixiao Weng

I Know that HET IDE can not used the HWA.

So i want to Know that HWA is to be able to compare through HTU or DMA by HET IDE Tool.

Regards.

DaeCheol

0 Haixiao Weng over 11 years ago in reply to DaeCheol Kang

You can read/write to the data fields of those HET instructions through R4F CPU, HTU or DMA. Any of these.

Regards,

Haixiao

Arm-based microcontrollers forum