MISRA-C strange results

Wilhelm Kinowsky

Prodigy 20 points

Other Parts Discussed in Thread: LAUNCHXL-TMS57004, HALCOGEN

Hi,

I am just playing with the LaunchPad LAUNCHXL-TMS57004 using HalCoGen 03.06.00 and CCS 5.5.0.

In CCS the MISRA check option is set to "required". With that I will got a very strange result.

Any idea?

over 12 years ago

0 Anthony F. Seely over 12 years ago

TI__Guru 69070 points

Wilhelm,

We probably need to move this to the CCS or the Compiler forum, which compiler version where you using to build?

0 Wilhelm Kinowsky over 12 years ago in reply to Anthony F. Seely

Prodigy 20 points

Hello Anthony,

We are using CCS 5.5.0. Is there a different version number for the compiler?

0 Anthony F. Seely over 12 years ago in reply to Wilhelm Kinowsky

TI__Guru 69070 points

Hi Wilhelm,

Yes, you can have different versions of the compiler installed and select between them in CCS. You might start with one compiler version but after updating you might have several installed... Since the issue appears to be compiler related I think the folks who analyze will need the version.

To see which compiler you're using right click on the project and select properties.
Note that sometimes the effective version doesn't match the version set by the project.
So in my example, I don't have v5.1.2 intalled as the project requests but v5.1.3 is being used instead.

Arm-based microcontrollers

Arm-based microcontrollers forum

MISRA-C strange results