• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 717 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Is Tiva TM4C129x Supported by Keil MDK 5?

Anup Halarnkar
Prodigy 110 points
Other Parts Discussed in Thread: TM4C129XNCZAD

Hi,

We are planning to use TM4C129x development kit along with Keil MDK 5. But, after downloading Keil MDK 5 when I checked its pack installer, I could not find the said TI microcontroller in their list.

I have referred to this document www.ti.com/lit/ml/spmu355/spmu355.pdf‎ from TI website.

Has anyone faced a similar issue?

Regards,

Anup H

  • 0
    Intellectual 380 points

    In KEIL MKD4 version 4.7X the various TM4C129XNCZAD parts are listed under the device menu without needing any add-on packages.

    In addition, the TM4C129/TM4E129 1024KB Flash option is listed under the Flash Download menu.

    I noticed that the 512KB option was not listed, but it shouldn't be hard to add. (just take the 1024 def and change few lines I assume)

    MDK5 is still new so you might want to stick with MDK4 for a while, but TI should have this added soon to MDK5 built-in.

    Bill