NETMFand Tiva

Calum Mackinnon

Genius 4155 points

Are there plans or has there been a port of NETMF onto a Tiva device?

Cheers

Calum

over 11 years ago

0 Stellaris Dexter over 11 years ago

TI__Genius 17225 points

I believe some third parties have done this with either Tiva or the previous Stellaris Devices.

There are no current plans for this work to be done inside TI or to be supported by TI.

Dexter

0 kyoman shim over 11 years ago

Prodigy 220 points

Hi, Calum

Do you need .netMF? I have been porting netMF 4.3 to TM4C129x.

Currently, available function list as following.

1. UART / SPI / I2C

2. USB for debug and deploy with C#.

Best Regards

kmshim

0 Bogdan Podlesnii over 9 years ago in reply to kyoman shim

Prodigy 10 points

Hi, Kyoman! I'm also interested in porting the netmf to TM4C12x controllers. Could you, please, share your code on github, for example? It will be great start for creating the netmf port for Tiva.

0 kyoman shim over 9 years ago in reply to Bogdan Podlesnii

Prodigy 220 points

Hi Bogdan,

Thanks for your interesting.
Unfortuanately I am busy to develope the software of our product based on freertos and lwip. so I have been investing a little time to port netMF4.5 with GCC 5.2.1 and VS2015 community to TM4C129x. and I think that the results of porting may be prepared at middle of April.

Best regards.

kmshim

Arm-based microcontrollers

Arm-based microcontrollers forum

NETMFand Tiva