ADC Output to Kentec LCD Display

Hello Nichol,

Are you using the Graphic Library?

Regards

Amit

Yes i am using the graphic library. Any other additional information that i need to provide?

Hello Nichol

Can you run the following example code

C:\ti\TivaWare_C_Series-2.1.0.12573\examples\boards\ek-tm4c1294xl-boostxl-kentec-l35\fontview

This will help you in working out the first level details of how to make changes to the font of the text on the EK-TM4C129XL board using the grlib. We can then build the code from there.

Regards

Amit

Sorry, I couldn't find that example code. How is that example code obtained?

Hello Nichol

You would have to download the latest TIVAWare 2.1.0 from the ti website

Regards

Amit

Nichol Lim said:

I'm using TIVA C Series EK-TM4C123GXL Launchpad.

Perhaps this fact has escaped attention....  (i.e.  suggested 4C129 appears "not" in play, here)

Hello cb1_mobile,

Thanks for the correction. The obvious got missed

Hello Nichol,

How are you interfacing the LCD Panel to the TM4C123 device?

Regards

Amit

@ Amit,

Answering as many as you do - the "miss" of single numeral w/in part number hardly qualifies as, "correction."  Prefer to consider it a, "re-steering" - so that time/effort focuses more directly...