TPS65381 CANWU Can transceiver INH line

Charles@work

Other Parts Discussed in Thread: SN65HVD1040

Looked through the various TI can transceivers and didn't see one that has INH line so that one can wakeup the TPS6381. Wanted to use a TI part, but didn't seem to be able to find one.

Does TI have such a part or parts?

over 11 years ago

0 Sunil Oak over 11 years ago

TI__Mastermind 49120 points

You can look at http://www.ti.com/product/sn65hvd1040

Regards,

Sunil

0 Charles@work over 11 years ago in reply to Sunil Oak

Prodigy 70 points

Please explain how the hvd1040 would satisfy what I am looking to do - drive the CANWU line on the TPS65381, I don't see an INH line to do any driving,. STB is for the chip itself, and SPLIT is for termination.

0 Charles@work over 11 years ago in reply to Charles@work

Prodigy 70 points

Since it seems like TI doesn't seem to want to sell CAN transceivers, I went with a NXP TJA1041 which includes an INH line.

0 Sunil Oak over 11 years ago in reply to Charles@work

TI__Mastermind 49120 points

Charles,

Sorry to hear about that. I could not identify a solution from TI that includes support for an INH line.

Regards, Sunil

0 Charles@work over 11 years ago in reply to Sunil Oak

Prodigy 70 points

Sunil,

The important thing would have been to follow up after your first email that TI didn't have a solution rather than pointing me to a chip that wouldn't work.

Arm-based microcontrollers

Arm-based microcontrollers forum

TPS65381 CANWU Can transceiver INH line