• State
  • Locked Locked
  • Replies 6 replies
  • Subscribers 29 subscribers
  • Views 299 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DK- TM4C129x

utpal kumar
Expert 2340 points

Dear All,

I am working on DK- TM4C129x  EVM for one of my project.

Please help me to get answers for my queries mentioned below.

1>>  Does TIVA  (TM4C129x series )MCU supports SD Cards upto 8GB ?

2>>  Unicode Support

3>> Multi Language display can be implemented with TIVA TM4C129x platform

4>> Limitation on pendrive memory size 

5>> Is it possible to interface a keyboard & a pendrive with Dk-TM4C129x in such a way ,both should work simultaneously.

 

Thanks & regards :--

Utpal

 

  • 0
    Expert 2340 points

    Dear All,

    Please respond on queries mentioned in above post.

  • 0 in reply to utpal kumar
    Guru 27285 points

    utpal kumar said:
    Please respond on queries mentioned in above post.

     Otherwise???

      Hey this sound as offending anathema!!!!

     Please can you try a more kind and quiet request?

     So not all your question can be answered.

     So try new request as..
     Please can someone help me answering some or all of my question..

     And don't remember give some thank, we are sharing our free time and not get pay'd by you nor TI.

  • 0
    Guru 27285 points

    utpal kumar said:
    1>>  Does TIVA  (TM4C129x series )MCU supports SD Cards upto 8GB ?

     Support is not known, my 16GB work and a near empty 32GB was read and written.

    utpal kumar said:
    2>>  Unicode Support

     Don't know

    utpal kumar said:
    3>> Multi Language display can be implemented with TIVA TM4C129x platform

     this is to your skill and knowledge too. I can implement all language I know ... I never can imagine what is your wishing...

    utpal kumar said:
    4>> Limitation on pendrive memory size

     Again not know, the large I own 128GB was read on test, we decided avoid write due to cost of pen.

    utpal kumar said:
    5>> Is it possible to interface a keyboard & a pendrive with Dk-TM4C129x in such a way ,both should work simultaneously.

     This is reported on HUB example

  • 0 in reply to Roberto Romano
    Guru 47900 points

    Roberto Romano said:
    Please can you try a more kind and quiet request?

    This reporter agrees fully w/Roberto - you've done very little to "sell" your request - demonstrated only minor interest/effort - and then become even more demanding - after only a single day's passage...

    Suspect that if you detailed how any response would potentially benefit others (not just, "Me, me, me!") and revealed the efforts you had made - and then more, "tightly framed" your issues - responses would improve...

    Doubt Roberto nor I are being, "mean" - your post did "ring" both of our bells - we've been around the tech block a bit - and react here so that you may consider some alternate path...  (i.e. one which enjoys "some chance" of success...)

  • 0 in reply to Roberto Romano
    Expert 2340 points

    Hi Roberto,

    First of all sorry for the offending words ,though i din't mean that.

    I will take care from next time for sure.

    Thanks for your reply!!

  • 0
    Guru 27285 points

    utpal kumar said:
    2>>  Unicode Support

     Browsing directory to get code working I noticed an Unicode folder so I suppose it is supported too.