DRV8301LS12Kit GUI(BLDC) could not work

Hiroyasu Matsubara

Other Parts Discussed in Thread: MOTORWARE, INSTASPIN-BLDC

I tried to use Hercules Motorware demo "TMS570LS12 instaspin-BLDC" on DRV8301LS12kit,but couldn't.

The GUI has started, but the GUI stopped at the attached status.

I wonder if the ".out" file could be loaded to TMS570LS12 correctly, the reason is that when "Loading application..." , the LED on the control card didn't blink at all.

Please could anyone tell me why I failed to run the BLDC GUI ?

I would appriciate if someone could reply to my question.

Regards,

Hiroyasu

over 11 years ago

0 Leo Huang1 over 11 years ago

TI__Prodigy 710 points

Thank you for using the Hercules forum! One of our engineers has been notified of this issue.

0 Hiroyasu Matsubara over 11 years ago in reply to Leo Huang1

Expert 1405 points

Hi Leo,

Thank you for your coorporation.

I would like to be able to use Instaspin GUI on Hercules MCU.

By the way,the MCU project that used with Hercules Instaspin MCU could be opened ?

I think if it is opened , it could be helpful because the users could make GUI that could drive motors

easily.

Hiroyasu

0 Travis Hwang over 11 years ago in reply to Hiroyasu Matsubara

TI__Intellectual 895 points

Hi Hiroyasu-san,

I experienced the same issue with my DRV8301LS12 EVM.

You may have to use the proper version of GUI composer for the Demo.

I confirmed the GUI composer is not compatible between latest version and the version included in DVD.

With the proper version of GUI composer, you may see the normal operation of the Demo.

Travis Hwang

0 Hiroyasu Matsubara over 10 years ago in reply to Travis Hwang

Expert 1405 points

Mr. Travis,

Thank you for your reply.
I'll try to do it.

Arm-based microcontrollers

Arm-based microcontrollers forum

DRV8301LS12Kit GUI(BLDC) could not work