Differences Between TM4C129ENCPDT and XM4C129ENCPDT

Erhan Ergun

Intellectual 270 points

Other Parts Discussed in Thread: TM4C129ENCPDT

Hello friends.

I am new at TI MCUs. I want to get TM4C129ENCPDT but found XM4C129ENCPDTI1. They looks similar.

What is the difference. I know TM4C129ENCPDT in preview status. Is XM4C129 preview?

Thank You

over 11 years ago

0 Amit Ashara over 11 years ago

TI__Guru**** 244440 points

Hello Erhan,

"X" is the experimental designator for the "T" parts. Once it goes through all testing it is converted to "T" designator and then made active and available for ordering.

From feature perspective "X" and "T" are identical, but please do refer to the Errata Document.

Regards

Amit

0 Erhan Ergun over 11 years ago in reply to Amit Ashara

Intellectual 270 points

Thank You fo your reply.

Is this means should i choose T parts in order to use in new designs? That is a bad new for me :/

That product fits my needs completely.

0 Amit Ashara over 11 years ago in reply to Erhan Ergun

TI__Guru**** 244440 points

Hello Erhan,

You can use one of the XM4C129 devices either on the DK or the EK kit (please do match the pin and pad tables) and then replace when TM4C129 parts are ACTIVE.

Regards

Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

Differences Between TM4C129ENCPDT and XM4C129ENCPDT