airmouse.bin missing at Tivaware for Tiva Connected Launchpad

Amit,

   I have airmouse at Tivaware for Tiva Launchpad. I will just port it for Tiva Connected Launchpad, as I don't have Tiva Launchpad. 

   It is just not convenient this way as I have to do some effort to make it work for Tiva Connected Launchpad. 

- kel

Hello Kel,

Yes, it is not there for the connected launchpad, but the example exists for DK-TM4C129. It would be preferable to use the DK version to avoid compilation issues or run time issue as Address Map and defines have changed between 123 and 129.

Regards

Amit

Hi Amit,

Amit Ashara said:

Yes, it is not there for the connected launchpad, but the example exists for DK-TM4C129

     I just downloaded the "DK-TM4C129X Kit Software", from the link below and I can't find any airmouse folder. I will try to find it again at the folders at a later time.

     http://software-dl.ti.com/tiva-c/SW-DK-TM4C129X/2.0/index_FDS.html

     Other, people will encounter this problem, following the Sensor Hub Getting Started Guide.

- kel

Hello Kel,

Good point you made that it should be as part of the board software installer. The main TIVAWare Full Installer has it, and that is what I use every time.

Will need to make some kind of note on the website so that main installer is also brought in.

Regards

Amit

Amit,

    I would understand this to be missing at DK-TM4C129, as it is big to demo as an airmouse. But, for Tiva Connected Launchpad, it is just right to have it at the board software installer.

- kel

Hello kel,

That is why I mentioned that it be a note for us to ensure that application can be included in the board software installer as well, besides the main line TIVAWare release. Or at least a better way of communicating on the link itself.

Regards

Amit