HalCoGen Config. File of DRV8301-LS31 Kit

Furkan Aydogan1

Other Parts Discussed in Thread: HALCOGEN, MOTORWARE, TMS570LS3137

Hi,

At the project folder of FOC software for DRV8301-LS31 kits, i couldn't find its HalCoGen config file(.hcg). I am trying to understand some peripherals configurations like nhet of EVM so i need its config file. I would be appreciate if you could share it.

Thanks.

over 11 years ago

0 Rick Duncan over 11 years ago

TI__Guru** 114905 points

Hi Furkan,

I am moving your post to the Hercules Safety Microcontrollers forum. This forum has significant discussion on HalCoGen.

0 Furkan Aydogan1 over 11 years ago in reply to Rick Duncan

Intellectual 450 points

I still waiting for some help.

0 Sunil Oak over 11 years ago

TI__Mastermind 49120 points

Hi Furkan,

Sorry for this post getting dropped by accident.

The FOC example software was indeed based on code generated using HALCoGen with initial configurations. This code base was then significantly modified to implement the required functionality.

NHET, for example, has its own processing engine and the instructions executed by the NHET are not generated by HALCoGen. Rather, these instructions can be found in the 8301.het file under the C:\ti\Hercules\MotorWare\v1.0.3.03\sw\drivers\het\src\32b\hercules\tms570ls3137 folder (assuming installation under C:\ti\).

Regards, Sunil

0 Furkan Aydogan1 over 11 years ago in reply to Sunil Oak

Intellectual 450 points

Hi Sunil, Thanks for answer. So its better to observe configurations from header and source files.

Arm-based microcontrollers

Arm-based microcontrollers forum

HalCoGen Config. File of DRV8301-LS31 Kit