Tiva C board sample with booster pack

Maneesh Sharma

Other Parts Discussed in Thread: EK-TM4C123GXL

While building for Tiva C board sample downloaded from the link, unable to follow instruction as after build get 4 errors and 1 warning.

Tiva C series software --integrate the project in Tiva C library, you just need to put the project file into the Tiva C installation file to build and test.

Path: TivaWare_C_Series-1.1\examples\boards\ek-tm4c123gxl\ FuelTank_BoosterPack for CSS project import

Please suggest resolution for this.

Thank you.

over 11 years ago

0 Amit Ashara over 11 years ago

TI__Guru**** 244400 points

Hello Maneesh,

The TivaWare 1.1 is a old version of the software release. You might want to update to 2.1.0 version where the example is in

C:\ti\TivaWare_C_Series-2.1.0.12573\examples\boards\ek-tm4c123gxl-boostxl-battpack\boostxl_battpack

check if it is the same, import the project in CCS and compile it.

If still you face the problem, then it would easier for us to support.

Regards,

Amit

0 Maneesh Sharma over 11 years ago in reply to Amit Ashara

Prodigy 140 points

Thanks for the prompt response. It's good now.

Best Regards,

Maneesh

Arm-based microcontrollers

Arm-based microcontrollers forum

Tiva C board sample with booster pack