PIL setup for TMDX570LC43HDK USB Kit via XDS100v2

sans cheeramveli santosh

Prodigy 70 points

Other Parts Discussed in Thread: TMDX570LC43HDK, CODECOMPOSER

Hello ,

I got a new TMDX570LC43HDK kit.I would like to setup a PIL for TMDX570LC43HDK USB Kit via XDS100v2 .

Kindly inform me how to do it safely in windows7 enviroment for CodeComposer Studio CCS v5.4.0.00091.

Thanks and Regards,

Sans

over 11 years ago

0 Anthony F. Seely over 11 years ago

TI__Guru 69070 points

Sans,

Please describe in more detail what you would like to do.

Also using the TMDX570LC43HDK with CCSv5.4.0.00091 is not recommended. Device support for this product begins with CCSv6.0.0.

0 sans cheeramveli santosh over 11 years ago in reply to Anthony F. Seely

Prodigy 70 points

Anthony ,

okay when we bought this kit , the CD in the packet contained this version of ccs.

Anyway thanks for informing The right ccs version to be used.

Thanks. And Regards,

Sans

0 Anthony F. Seely over 11 years ago in reply to sans cheeramveli santosh

TI__Guru 69070 points

Sans

Sorry about that. The kits were available for a while before announcement to early adopters, and the disks were burned early on. But the support in CCSv5.4 isn't clean and so I wouldn't recommend it.

If you install 6.0.0.00190 there are some updates you need to get through the Install New Software menu in code composer. There is a 6.0.1 release of CCS that is imminent and it will include support for your LC4357 in the installer (you won't have to update afterwards).

Arm-based microcontrollers

Arm-based microcontrollers forum

PIL setup for TMDX570LC43HDK USB Kit via XDS100v2