• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 29 subscribers
  • Views 367 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

20X4 LCD INTERFACING WITH TM4C123GH6PZ

Raaki ponki
Intellectual 410 points
Other Parts Discussed in Thread: TM4C123GH6PZ

Hi..i'm interfacing the 20x4 LCD TM4C123GH6PZ ...i have used PORTA for (LCDD0-LCD7)...PH0 for E n PH1 for RS..for these pins my lcd is working .

Now i have changed to PORTG for (LCDD0-LCD7).PH0 for RS n PH1 for E.now i'm not able to display anything..suggestion please????

thanks in advance..

  • 0
    Guru 27285 points

    Raaki ponki said:
    Now i have changed to PORTG for (LCDD0-LCD7).PH0 for RS n PH1 for E.now i'm not able to display anything..suggestion please????

     Uhm.. I changed place and I cannot see you, where are you in Our magic tool seeing remote user?? ;)

     Please be more precise to help us help you:

     Board type DK EK custom

     at almost initialization code...

     More detail about..

     Sorry missing these detail our magic probe cannot see your issue.

  • 0 in reply to Roberto Romano
    Intellectual 410 points

    Hi..sorry..i have done mistake in GPIO configuration..Now i can able to get the output..