• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 262 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

where to begin

SARATHI KANNAN
Prodigy 30 points

Hi,

      I am going to start my project with Tiva C Series TM4C129X, i have knowledge only in AVR & PIC controllers. I want to become versatile in this controller. I don't know how to do program for this controller.  So just guide me how & where to start my learning process.  

  • 0
    Guru 86745 points

    Hi,

       If you have a Tiva Connected Launchpad or EK-TM4C129, download the workbook pdf from the link below. You can learn from the labs in that workbook. Also, read the sticky posts in this forum.

    http://processors.wiki.ti.com/index.php/Creating_IoT_Solutions_with_the_TM4C1294XL_Connected_LaunchPad_Workshop

    - kel

  • 0
    Guru 117855 points

    SARATHI KANNAN said:
    So just guide me how & where to start my learning process.  

    May I guide you to be bit less demanding/commanding in such requests?  Use of "please" is a well noted social lubricant - absent your request.  ("Just guide me" comes across as a command - doubt that was your intention - most here give freely of their time/effort - yet few wish to be "commanded!")  I make this observation for your/others benefit.

    You've chosen to start w/vendor's, "best/brightest" (and most demanding) ARM MCU, here.  Is that deliberate?  Is it wise? 

    Might the more available, less costly "123" series prove a superior choice for your investigation & learning?  (our small tech group believes so...)

  • 0 in reply to cb1_mobile
    Guru 20670 points

    If you never used a Tiva, i also advise using the tm4c123 launchpad, the smaller one.

  • 0 in reply to Luis Afonso
    TI__Guru**** 244400 points

    Hello Sarathi,

    Please do not take my statement as something negative.

    Becoming versatile in a processor is not about getting a EVM (LaunchPad in our case) and coding-programming "hello world" or "blinky". It is about having an application in mind and then converting it into a physical product. So where to begin: Forum members have given the workshop link, etc, I would advise think of what you want to do (within the bounds of compute power of a uC like TM4C) and then work towards it with the workshops, data manuals, etc

    Regards

    Amit