about TMS570LC4357 pin numbers

the pin number of TMS570LC4357 in its datasheet is different from that in TMS570LC43x Hercules Development Kit

Thanks for reporting this.  We'll forward to the board owner.

Please see the page 5 of the schematics:

For several EMIF pins, there are two choices for the pins: primary terminal pinmux and secondary terminal pinmux. HDK uses pin E[9:6] for EMIF_ADDR[5:2].

Regards,

QJ

thanks for your reply. 

EMIF_ADDR[5:2] only on the pin E[9:6], my question is  in U1G(PAGE03: MCU EMIF) of tms570lc43_schematics_reve ,why EMIF_ADDR[5:2]  on the  pin D[9:6]. in he project only  the EMIF  port is used ,the ETM port is not used, so i directly use the U1G part of TMS570LC4357, but not the U1C part. i think this will make a mistake. or say it directly there are some mistakes in U1G part,i think, 

sorry, a wrong word.

thanks for your reply. 

EMIF_ADDR[5:2] only on the pin E[9:6], my question is  in U1G(PAGE03: MCU EMIF) of tms570lc43_schematics_reve ,why EMIF_ADDR[5:2]  on the  pin D[9:6]. in my project only  the EMIF  port is used ,the ETM port is not used, so i directly use the U1G part of TMS570LC4357, but not the U1C part. i think this will make a mistake. or say it directly there are some mistakes in U1G part,i think, 

I will update the LC4357 symbol and the schematics. Thanks

Regards,

QJ