Debugging 2 Tiva Launchpads

Hello Vivek,

Are you using the Stellaris ICDI for debug or an external debugger like XDS?

Regards
Amit

ICDI

Hello Vivek,

That would not be possible for the Tiva LaunchPad with the ICDI as there is no unique identifier for the ICDI (I know for sure other LaunchPads are now adding that capability)

Regards
Amit

Hi Amit,

Thanks for your response. After a bit of digging I've found out that this can be done using XDS100v2. Is this the right part number?

The part description says it's both 20-pin and 10-pin. What does that mean? Launchpad has only 10 pin header.

Hello Vivek,

XDS100v2 can do that, but let me check the same (I have a note on doing so). I believe you have the TM4C129 LaunchPad/

Regards
Amit

Yes Amit,

I am using TM4C129 launchpad.

Regards
Vivek

If you have enough memory and resource open two virtual machine with VM virtual box then assign one device per VM.
This can be slow.

Hello Vivek,

Each XDS100v2 has a serial number that needs to be used in the CCS ccxml file. Can you as well confirm to me which all headers do you have, the exact model number for the XDS100v2 (TMDSEMU100V2U-ARM-XDS100v2) that you are using?

Regards
Amit

Amit,

I have to purchase a JTAG for the project. Can you suggest which one I should use for the TIVA connected launchpad?

Regards,
Vivek

Hello Vivek,

The ARM version is the one to select. I will send out the details on connection as well shortly.

Regards
Amit