• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 31 subscribers
  • Views 1158 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Make a quad with TM4C123GXL and IMU sensor

yuva raj77
Prodigy 10 points

I need to buit a quadcopter with this particular board. Help Help !!!

I need from the basic how to upload the program to the the TM4C123GXL and how do I connect the ESC to this particular board and how to connect the receiver in it. I need from step 1 to upto step last so please any body can help me out. I need a proper guidance


Thanks

Yuvaraj

  • 0 in reply to Amit Ashara
    Guru 47900 points

    How long before, "I need" or "I wanna" leads to (famed), "Does not Work!?"

    Does not the (entirely open-ended) nature of such a posting point strongly to (some) poster guidance?

    Does the (presumed) purchase of a ~15 (USD) econo-board entitle the poster to, "cradle to grave", detailed, always FREE Tech Support?  

    Poster (here) shows very little understanding of how, "real world" works/functions.  "Begging" for others to provide, "detailed, point by point guidance" has no basis in reality - and effectively "highlights" the effects of a, "wild-west" (unguided) forum...

  • 0
    Guru 20670 points
    Hi yuva

    You ask how to build a house before you can even lay a brick.
    You don't seem to ever used the launchpad am I correct?
    About the ESC I can't really help you.

    If you want to actually start working with the Tiva launchpad you can consult this:
    sites.google.com/.../tiva-tutorials
    Read up what's in there + the MCU datasheet + TivaWare peripheral driver library user guide. Then from there search how to use the ESC, see what it requires. You can read on the basics of the Tiva and then the peripherals needed to control the ESC.
    Seems to much to do? Well, so does laying bricks to a full house, but unfortunately it's how it works
  • 0 in reply to Luis Afonso
    Guru 27285 points

    Oh no Luis, you can also build an house...

    Ask an architect drive you step by step for free ;)

    Also code for quadcopter where is??

     Quadcopter, my pleasant design.. We .-. help HELP HELP  help,  can someone drive me write a Kalmann filter??? I wish someone drive me step by step over the keyboard pushing the key one after the other.... Oh.. thinking again my old finger wish someone type for me....

    Esc can be connected on any GPIO or better on PWM but again ...

    TI PLEASE STOP THIS ASYLUMMMMM!!!!!!