tiva c series

Muhammad Shibil B R

Other Parts Discussed in Thread: TM4C123GH6PM

i am currently working on tiva series mcu TM4C123GH6PM.everything was going well,but suddenly some errors showing like as

Description Resource Path Location Type
gmake: *** No rule to make target `D:/Atoll/boards/ek-lm4f232/drivers/cfal96x64x16.c', needed by `drivers/cfal96x64x16.obj'. ATOLL_RemoteMonitering Unknown C/C++ Problem

Description Resource Path Location Type
cannot open source file "inc/hw_ints.h" spi_flash.c /ATOLL_RemoteMonitering line 12 C/C++ Problem

any one is there pls help me???

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244400 points

Hello Muhammad,

Which board are you using?

Regards
Amit

0 Muhammad Shibil B R over 10 years ago in reply to Amit Ashara

Prodigy 180 points

tiva c series luanchpad

0 Amit Ashara over 10 years ago in reply to Muhammad Shibil B R

TI__Guru**** 244400 points

Hello Muhammad,

It seems that the either the source file or the link has got deleted. Can you check the TivaWare folders still have the original version, if yes, then copy the c file to the corresponding link?

Regards
Amit

0 Muhammad Shibil B R over 10 years ago in reply to Amit Ashara

Prodigy 180 points

hi
Amit ,thanks for the response.i will try and inform you

Regards
Shibil

0 Muhammad Shibil B R over 10 years ago in reply to Amit Ashara

Prodigy 180 points

Hi Amit,

I am copy the all c and h file,then start a new workspace.now it going well...thank u for the response

Regards

Shibil

0 Amit Ashara over 10 years ago in reply to Muhammad Shibil B R

TI__Guru**** 244400 points

Hello Shibil,

A better way is to import an already working example and then use the same to update your application code.

Regards
Amit

Arm-based microcontrollers

Arm-based microcontrollers forum

tiva c series