generation of bin file using CCS6.0

Hello Siva,

You can load one of the existing CCS projects and see the Post-Build Steps which give the entire command for bin file generation

Regards
Amit

do u mean build setting?

can u show me the steps?

hello Amit,
i included the entire command in one step in post build box. even then it is not generating .bin file.
tiobj2bin and mkhex4bin files are in respective path.
kindly suggest what to do next?

Hello Siva,

You can do the following steps

1. Zip a simple project like with an empty main and send it across for inspection
2. Load an existing example from TivaWare and then reuse the same to generate the bin by replacing your code into the imported project.

Regards
Amit

while building the project ,i got the below error :


'Finished building target: helloworld.out'
' '
"c:/ti/ccsv6/utils/tiobj2bin/tiobj2bin" "helloworld.out""helloworld.bin" "c:/ti/ccsv6/tools/compiler/arm_5.1.5/bin/armofd" "c:/ti/ccsv6/tools/compiler/arm_5.1.5/bin/armhex""c:/ti/ccsv6/utils/tiobj2bin/mkhex4bin"
-------------- Error message mentioning wiki here ---------------
The filename, directory name, or volume label syntax is incorrect.
'mkhex4bin' is not recognized as an internal or external command,
operable program or batch file.
'C:\Users\vijay\workspace_v6_0\helloworld\Debug\armhex' is not recognized as an internal or external command,
operable program or batch file.
' '

**** Build Finished ****

how to upload the project

Hello Siva,

Did you check if the files exist in the corresponding folders? Also is the out file correctly generated?

Regards
Amit

after including hex generator from the tool chain .iam able to generate .bin file
thanks for your support.