• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 349 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Data to the serial port

surendra malampati
Intellectual 960 points

How to send the hex value(0x05) to the serial port. Here i want to send the 0x05 hexadecimal value to my uart.

  • 0
    Expert 2415 points

    Surenda,

    Sorry to have to be so blunt, but it is painfully obvious that you haven't even tried to read through the TivaWare manual, your device's datasheet or looked at the examples bundled with TivaWare.

    Please go do your homework (the abovementioned reading) before you come back with more questions.

    Best,

    Veikko

  • 0
    TI__Guru**** 244440 points
    Hello Surendra,

    Are you using a TM4C device. Which board, which device in TM4C12x , have you gone through the examples? No details, other than sending of a hex character!

    Regards
    Amit