• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 671 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HalCoGen Tool with GHS MULTI IDE

Prasanna
Intellectual 275 points

Other Parts Discussed in Thread: HALCOGEN

I want to import the source files generated by the HALCOGEN Tool into the GHS MULTI IDE and compile.

Can anybody provide the guidelines? There is a document provided for the CCS Tool. Does the same procedure apply to GHS Tool as well?

  • 0
    TI__Guru 69050 points

    Sai,

    You can select the GHS multi tool chain when you create your project and that should do the bulk of the job,  see (a) below.

    Usually there are links to appnotes on how to create projects for the IDEs (b) but I only see IAR and Keil and FreeRTOS listed.

    Will check to see if there's some document for GHS.

  • 0 in reply to Anthony F. Seely
    Intellectual 275 points

    Anthony,

    Thanks for your reply,

    I tried the above thing i.e, the selection of GHS Tools chain during project creation and followed the steps

    as given in document for CCS Tool. But I couldn't see the generated files porting into the GHS Tool.

    Please check If there is any document specifically for GHS. that would be really helpful.

    -

    Sai

  • 0 in reply to Prasanna
    TI__Guru 69050 points
    Sai,
    Sorry it doesn't look like we have an appnote.
    But maybe ask GHS if they have an appnote or example of how to create a project and import existing code into it.