Conexant CX93510 JPEG encoder with TM4C1294 processor

Sergio Kamakura

I am involved in a design of a special video grabber board and intend to use the Conexant CX93510 JPEG encoder IC connected to TM4C1294 processor.

Someone used CX93510 before? Could you share your experience with me?

Thanks.

Sergio

over 10 years ago

0 cb1 over 10 years ago

Guru 47900 points

There may be an "easier and/or faster" approach.

If you "enable conversations" (perhaps now changed to private messages) which appears in your, "Forum Identity & Registration" section of this forum - I can provide further details...

0 Zhaohong Zhang over 10 years ago

TI__Mastermind 22715 points

Sargio,

You should be able to connect Conexant CX93510 to TM4C1294 with SPI/I2C/UART interfaces.

Thanks and regards,

Zhaohong

0 Sergio Kamakura over 10 years ago in reply to cb1

Expert 2495 points

Hi cb1

I couldn't find how to activate private messages here.

You can contact me at serkam@terra.com.br.

Thanks

Sergio

0 Sergio Kamakura over 10 years ago in reply to Zhaohong Zhang

Expert 2495 points

Hi Zhaohong

Yes, I know it.

But, the problem is that Conexant doesn't release the user's guide of this chip, I don't know why.

If you have it, can you share it at serkam@terra.com.br?

Thanks.

Sergio

0 Zhaohong Zhang over 10 years ago in reply to Sergio Kamakura

TI__Mastermind 22715 points

Sergio,

I could not find it either.

Thanks and regards,

Zhaohong

0 cb1 over 10 years ago in reply to Sergio Kamakura

Guru 47900 points

Sergio Kamakura said:
I couldn't find how to activate private messages here.

Unfortunately I visit many forums/public spaces - keeping items (together/organized - as I've suggested) works best - by far.

If the "effort" involved is indeed, "too hard" I doubt that success w/your request will prove much easier...

[edit 11:27 CST] Poster has "conversed" and I've replied...

Arm-based microcontrollers

Arm-based microcontrollers forum

Conexant CX93510 JPEG encoder with TM4C1294 processor