Broken Links 3137 HDK Page

John Westmoreland43

Guru 13945 points

Other Parts Discussed in Thread: TMS570LS3137

The following links (IN RED) are still broken on the 3137 HDK Page:

HDK Board Schematic

The PDF format schematic drawings for the TMS570LS31x HDK is available here:
TMS570LS31_HDK_Schematics_RevE.pdf

The Cadence Capture Format format schematic drawings for the TMS570LS31x HDK is available here:

TMS570LS31_HDK_Schematics.zip

The gerber files for the TMS570LS31x HDK are available here: TMS570LS31_HDK_Gerber.zip

The BOM for the TMS570LS31x HDK are available here: TMS570LS31_HDK_BOM.zip

The RevE HDK ECN is available here: TMS570LS31x_HDK_REVE_ECN.zip

Orcad Symbol

Regards,
johnw

over 10 years ago

0 John Westmoreland43 over 10 years ago

Guru 13945 points

Is anyone from TI going to recognize that links on the HDK page are set for 'upload' when they are clearly meant for download?

0 Anthony F. Seely over 10 years ago in reply to John Westmoreland43

TI__Guru 68950 points

John,

We're aware. The files were actually moved off the wiki and into the product folders at ti.com . For example: www.ti.com/.../TMDS570LS31HDK.

This process didn't go well though - some key files went missing - so we asked that the Wiki be restored as much as possible until it could be sorted out. Eventually when we've got the major packages (correctly) available on ti.com again these wiki pages will go away.

Sorry about the confusion - but for these large downloads it might make sense to look on ti.com and only go to the wiki as a backup - if you're not finding what you need.

0 Christian Herget over 10 years ago

TI__Expert 6985 points

John,

I cleaned up the Wiki Page for the RM48 HDK a few days ago.

We still have the files you are requesting available from their, please note that the layout is exactly the same between the TMS570LS3137 and the RM48 HDK.

But, I agree with Anthony we should use TI.com (not the Wiki) as a single source for these kinds of documents.

Best Regards,
Christian

0 John Westmoreland43 over 10 years ago in reply to Christian Herget

Guru 13945 points

Christian,

The pin-outs for the RM48 are exactly the same?

HDK Quick Start
A digital version of the Quick Start Guide included in the kit is available here: RM48_HDK_Quick_Start_.pdf

That link is broken on that page - but I guess you're aware of that.

Regards,
JohnW.

0 Anthony F. Seely over 10 years ago in reply to John Westmoreland43

TI__Guru 68950 points

PCB is the same.
The pinouts differ in the flexray pins.

0 John Westmoreland43 over 10 years ago in reply to Anthony F. Seely

Guru 13945 points

OK - thanks Anthony,
John

Arm-based microcontrollers

Arm-based microcontrollers forum

Broken Links 3137 HDK Page

HDK Board Schematic

Orcad Symbol